Description
| Empty enclosures | |||
 |
Description | Number of ways |
Reference |
| Enclosure comprising: – the enclosure, -internal mounting plate, -cable sleeve for Ø 8 to 26mm cable, -internal cable clamp, -suspension ring, -cable tie (for tightening sleeve onto cable). |
2 3 (1) 4 5 (1) 6 8 12 |
XACA02 XACA03 XACA04 XACA05 XACA06 XACA08 XACA12 |
|
| Contact blocks for front mounting | ||||
 |
Description | Application | Function | Reference |
| Single block, spring return slow break |
Single speed – 2 speed |
N/O N/C N/C + N/O + N/O simultaneous (2) N/C + N/O + N/O staggered (2) |
ZB2BE101 ZB2BE102 XENG1491 XENG1191 |
|
| Isolating switch,slow break,for front mounting | ||||
 |
Description | Application | Function | Reference |
| XACA03 (frontal cut-out) XACA,A06, A08 (frontal or base cut-out) |
“Emergency stop” |
N/C + N/C + N/C with postiive opening operation |
XENT1192 | |
| Contact blocks for front mounting | |||
 |
Description | Function | Reference |
| Spring return slow break (4) |
N/O N/C N/O + N/O N/C + N/O |
XACS101 XACS102 XACS103 XACS104 |
|
| Pilot light bodies for front mounting | |||
 |
Description | Supply voltage | Reference |
| Direct supply Bulb not included (5) Direct supply,through resistor Incandescent BA 9s base fitting 130 V bulb supplied |
<=400V 230V |
ZB2BV006 ZB2BV007 |
|
(1) Enclosures with 3 cut-outs XACA03 and 5 cut-outs XACA05 cannot be fitted with a mounting adaptor for base mounted units.
(2) Only for use with XACA9 lll operators.
(3) Not suitable for use with the following operating heads: ZA2BB,ZA2BD,ZA2BG and ZA2BS.
(4) Not suitable for use with 3-position operating heads ZA2-BD and ZA2BG or for mounting in enclosure XACA039 and XACA03.
(5) Bulb types for use with direct supply:BA9s base fitting incandescent bulb U ≤130 V or neon bulb 110V ≤ U ≤ 400V;
maximum power 2.6W, maxium Ø 11mm, maximum length 28mm.
| Operating heads for front mounting | ||||
 |
Description | Colour | Sold in lot of |
Reference |
| Booted operators, complete |
White Black Green Red Yellow Blue Brown |
10 10 10 10 10 10 10 |
XACA9411 XACA9412 XACA9413 XACA9414 XACA9415 XACA9416 XACA9419 |
|
| Operating heads for front mounting | ||||
  |
Description | Colour | Sold in lot of |
Reference |
| Mushroom head, trigger action, latching Turn to release (Emergency stop) |
Red | Ø 30mm Ø 40mm |
ZA2BS834 ZA2BS844 |
|
| Selector switches, standard handle (Not to be used with XENGllll contact blocks) |
Black | 2 position stay put 3 position stay put (1) |
ZA2BD2 ZA2BD3 |
|
| Key switches (Ronis key n0 455) Key withdrawal in left and right hand positions |
– | 2 position stay put | ZA2BG4 | |
| Wobblesticks (2) for “Fast stop” function |
Black | ZA2BB2 | ||
| Pilot light heads | |||
 |
Description | Colour | Reference |
| For use with incandescent bulbs | |||
| Lens cap with fixing bezel |
White Green Red Clear |
ZA2BV01 ZA2BV03 ZA2BV04 ZA2BV07 |
|
| Bulbs (Sold in lots of 10) | ||||
 |
Description | Voltage (V) |
Sold in lot of |
Reference |
| Incandescent BA 9s base fitting Maximum power : 2.6W Maximum Ø: 11mm Maximum length: 28mm |
6V 12V 24V 48V 130V |
10 10 10 10 10 |
DL1CB006 DL1CE012 DL1CE024 DL1CE048 DL1CE130 |
|
| Neon BA 9s base fitting Maximum power : 2.6W Maximum Ø: 11mm Maximum length: 28mm |
110V 230V |
10 10 |
DL1CF110 DL1CF220 |
|
| Complementary accessories, tools | |||
|
Description | Reference | |
| Protective cable sleeve | For cable Ø 8 to 26mm | XACA960 | |
| Mechanical interlock for 2 operators |
with fixing screws | XACA009 | |
| Blanking plug | With seal and fixing nut | ZB2SZ3 | |
| Adaptor for self-support cable type BBAP |
Mounted with protective sleeve for cable Ø 8 to 26mm |
XACB961 | |
| Lower support ting | – | XACA971 | |
| Protective guards for base mounted units |
For selector switch (std. Handle) or mushroom head pushbutton |
XACA982 | |
| For key switch or key release latching mushroom head pushbutton |
XACA983 | ||
| Bulb extractor | For BA 9s base fitting bulbs | XBFX13 | |
