Description
- Supports both RS232C and RS485 communication in one device
: Separate ports for RS232C and RS485 - Connect up to 8 amplifier units
- Can be powered directly by amplifier units without additional wiring
- Support for dedicated device management software (atDisplacement)
: Batch parameter settings with save/load function
: Monitor measured values and outputs in real-time - Set communication speed and addresses using DIP switch without connecting to host devices
※ The communication converter (BD-C) firmware version 5.0 or above only supports the amplifier unit (BD-A1) firmware version 5.0 or above. Please check the firmware before use.
 |
 |
 |
 |
Supports both RS232C and RS485 Communication
D-SUB (RS232C communication) and terminal (RS485 communication) ports are both available for independent or simultaneous communication.
Directly Powered by Sensor Amplifier Units
The communication converters can be powered by the sensor amplifier unit by connecting the units using the side connector without requiring additional wiring.
atDisplacement Dedicated Device Management Software Support
When the communication converter is connected to a PC, the dedicated software atDisplacement can be used to set parameters for each sensor amplifier unit and measured values and output status can be monitored in real-time.
