Description
| Accessories for reversing motor starter assembly | ||
| Contactors with screw clamp terminals | ||
| Using 2 identical contactors | Set of power connections |
Mechanical interlock |
| Mechanical interlock | Reference | Reference |
| LC1E06…E12 LC1E18/E25 LC1E32/E38 LC1E40…E65 LC1E80/E95 LC1E120/E160 LC1E200/E250 LC1E300…E500 LC1E630 |
LAEP1 LAEP12 LAEP2 LAEP3 LAEP4 DIY(1) DIY(1) DIY(1) DIY(1) |
LAEM1 LAEM1 LAEM1 LAEM1 LAEM4 LAEM5 LAEM6 LAEM7 LAEM8 |
| RC surge suppressor | |||
| ■ Effective protection for circuits highly sensitive to “high frequency” interference and transcient generated when the contactor coil is switched off. For use only in cases where the voltage is virtually sinusoidal, i.e. less than 5 % total harmonic distortion. ■ Voltage limited to 3 Uc max. and oscillating frequency limited to 400 Hz max. ■ Slight increase in drop-out time (1.2 to 2 times the normal time). |
|||
| Mounting | For use with contactor Rating |
Type Rating |
Reference |
| Screw mounting | LC1E06…E95 | 24…48 50…127 110…240 380…415 |
LAERCE LAERCG LAERCU LAERCN |
| Instantaneous auxiliary contact blocks for connection by screw lamps terminals |
||
| – For use in normal operating environment | ||
| Clip-on mounting | Number of contacts per block |
Reference |
| Front | 1 NO / 1 NC 2 NO 2 NC 2 NO / 2 NC |
LAEN11 LAEN20 LAEN02 LAEN22 |
| Time delay auxiliary contact blocks for connection by screw clamp terminals 8 A – 690 V |
||||
| – For use in normal operating environment | ||||
| Clip-on mounting (2) |
Number of contacts per block |
Time delay Type |
Setting range |
Reference |
| Front | 1 NO / 1 NC | On-delay | 1…30 s | LAETSD |
| Auxiliary contact blocks, add-on modules and accessories. | ||||||||
| (1) Standard control circuit voltages. For other voltages please refer to catalogue. | ||||||||
| a.c. supply | ||||||||
| Volts | 24 | 48 | 110 | 220 | 240 | 380 | 415 | 440 |
| LC1E06…300 | ||||||||
| 50Hz 60Hz |
B5 B6 |
E5 – |
F5 F6 |
M5 M6 |
U5 – |
Q5 Q6 |
N5 – |
R5 R6 |
| LC1E400…630 | ||||||||
| 50/60 Hz | – | E7 | F7 | M7 | U7 | Q7 | N7 | R7 |
| 2) LC1E06 to E65: clip-on mounting on 35 mm 5 rail AM1 DP or screw fixing. LC1E80 to E95: clip-on mounting on 35 mm rail AM1DP or 75 mm rail AM1 DL or screw fixing. LC1E120 and E160: clip-on mounting on 2 x 35 mm 5 rail AM1 DP or screw fixing. |
||||||||
