Description
◼Built-in CM horizontal limit switch
◼High mechanical strength, mainly consists of aluminum cast
◼Water-proof and oil-proof construction
◼Same rated value and characteristic with CM horizontal limit switch
◼Various actuators for different applications
Ratings
| Rated Voltage | Noninductive Load (A) | Inductive Load (A) | ||||||
| Resistance Load | Lamp Load | Inductive Load | Motor Load | |||||
| NC | NO | NC | NO | NC | NO | NC | NO | |
|
125VAC 250VAC
|
5 5 |
5 5 |
1.5 1 |
0.7 0.5
|
3 3 |
3 3 |
2 1.5 |
1 0.8 |
| 8VDC | 5 | 5 | 3 | 3 | 5 | 4 | 3 | 3 |
| 14VDC | 5 | 5 | 3 | 3 | 4 | 4 | 3 | 3 |
| 30VDC | 5 | 5 | 3 | 3 | 4 | 4 | 3 | 3 |
| 125VDC | 0.4 | 0.4 | ||||||
| 250VDC | 0.2 | 0.2 | ||||||
| Inrush Current | N.C: below 24A, N.O: below 12A | |||||||
NOTES:
1.Inductive load has a power factor of 0.4 min.(AC) and a time constant of 7 msec. max.(DC).
2.Lamp load has an inrush current of 10 times the steady-state current,while motor load has an inrush current of 6 times the steady-state current.
3.Product with spring, its usable range of operating part is within one third of the whole spring length from the front end of spring.
|
Operation speed |
5mm-0.5m/s |
|
Operating frequency |
Electical: 20 operations/min |
|
Contact resistance |
25mΩ max. (initial value） |
|
Insulation resistance |
100mΩ min. （below 500VDC） |
|
Dielectric strength |
1500VAC, 50/60 Hz for 1 minute between current-carrying and non–current-carrying metal parts |
|
1500VAC, 50/60 Hz for 1 minute between current-carrying and non–current-carrying metal parts |
|
|
1500VAC, 50/60 Hz for 1 minute between each terminal and ground |
|
|
Vibration |
10-55Hz,1.5mm double amplitude |
|
Shock |
Mechanical durable: 1, 000m/Sec2 (about 100G’S) Malfunction: 300m/Sec2 (about 30G’S) |
|
Ambient temperature |
Using：-20~+80℃（With no icing） |
|
Humidity |
<95% RH |
|
Electrical life |
500,000 operations above |
|
Protection level |
IP66 |
| Model | TZ-6 | TZ-
6001 |
TZ-
6002 |
TZ-
6003 |
TZ-
6004 |
TZ-
6043 |
TZ-
6101 |
TZ-
6102 |
TZ-
6103 |
TZ-
6104 |
TZ-
6143 |
| operating force | OF(Max) | 250 ~350g | 250 ~350g | 570g | 570g | 800g | 500g | 640g | 640g | ||
| Release force | RF(Min.) | 114g | 114g | 170g | 170g | 240g | 100g | 230g | 230g | ||
| Pre-trave | PT(Max.) | 0.4mm | 0.5mm | 4mm | 4mm | 2mm | 1mm | 5mm | 5mm | ||
| Movement diferential | MD(Max.) | 0.05mm | 0.05mm | 0.4mm | 0.4mm | 0.1mm | 0.12mm | 0.4mm | 0.4mm | ||
| over travel | OT(Min.) | 5 . 5mm | 3.6mm | 6mm | 6mm | 5mm | 3.5mm | 6mm | 6mm | ||
| operating position | Op(mm.) | 38.2± 0.8mm | 49.7 ± 1mm | 45.8 ±0.8mm | 49.7 ± 0.8mm | ||||||
| Model | Appearance | Dimension |
| TZ-6001 |  |
 |
| TZ-6002 |  |
 |
| TZ-6003 |  |
 |
| TZ-6004 |  |
 |
| TZ-6101 |  |
 |
| TZ-6102 |  |
 |
| TZ-6103 |  |
 |
| TZ-6104 |  |
 |
| TZ-6106 |  |
 |
| TZ-6143 |  |
 |
